Weberwall Blokfix AAC Block Jointing Mortar (40kg)
Weberwall Blokfix is a thinset, non-refractory block jointing mortar for laying AAC blocks, CLC blocks, hollow concrete blocks and bricks, self-curing with no post-application treatment needed. 40kg bag.
Brand
Category
More Info
Product Overview
Weberwall Blokfix is a thinset, non-refractory block jointing mortar made of cement, fine sand and polymeric additives, designed for laying AAC blocks, CLC blocks, hollow concrete blocks and bricks. ARM Build Mart is an authorised Weber dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.
It is a self-curing formulation that needs no post-application curing treatment, giving good bond strength on cementitious block surfaces with a thin joint (from 4mm) that improves wall consistency and reduces mortar consumption compared to conventional thick-bed masonry mortar.
Features & Benefits
- Self-curing — no post-application curing required
- Suitable for AAC blocks, CLC blocks, hollow concrete blocks and bricks
- Thin-joint application from 4mm, reducing overall mortar consumption
- Good bond and compressive strength (>7.5 MPa at 28 days)
- Full wall installation achievable in 2–3 days
Applications & Usage
AAC Block Walls
Designed specifically for laying AAC (autoclaved aerated concrete) blocks with a thin, consistent joint.
CLC & Hollow Concrete Blocks
Also suitable for CLC blocks and hollow concrete block masonry.
Brick Masonry
Can be used for laying bricks where a thinset polymer-modified mortar is preferred.
Undulated Blocks
Works on blocks with minor surface undulation, applied from 4mm thickness onward.
Dosage, Mixing & Consumption
Mix in a ratio of 2.5 parts Weberwall Blokfix powder to 1 part clean water by volume. Mix for 5–10 minutes until smooth, allow 2–3 minutes to mature, then remix briefly before use. Consumption is approximately 7–7.5 kg/m² at 4mm bed thickness (varies with block surface condition) — so a 40kg bag covers roughly 5.3–5.7 m² at 4mm.
- Pre-wet blocks to a touch-dry state before application
- Mix powder with water in the specified ratio to a smooth, lump-free paste
- Apply with a notched trowel on block faces and structural elements
- Position the block and tap into place with a rubber hammer for full contact
- Work within the 5–10 minute open time; do not add water to extend pot life
- Complete a full wall in stages — typically achievable in 2–3 days
Full Specifications
| Product Type | Polymer modified, non-refractory cement-based block jointing mortar, powder form |
| Colour | Grey |
| Mixing Ratio | 2.5 parts powder : 1 part clean water (by volume) |
| Bulk Density | 1.45–1.55 g/cc |
| Pot Life | 60 minutes (at 27°C) |
| Open Time | 5–10 minutes (at 27°C) |
| Initial Setting Time | 350–450 minutes |
| Final Setting Time | 450–550 minutes |
| Minimum Application Thickness | 4mm |
| Coverage/Consumption | ~7–7.5 kg/m² at 4mm bed thickness |
| Compressive Strength (28 days) | >7.5 MPa |
| Tensile Splitting Strength | >0.3 MPa (4mm bed, 90% transfer) |
| Standards Compliance | [NOT STATED ON TDS — confirm with Weber technical team before publishing] |
| Shelf Life | 12 months from date of manufacture, sealed, stored in cool, dry conditions |
| Packaging | 40kg bag |
| ERP Item Code | CCD-WEB-DCE-008 [FROM YOUR ERP] |
Storage & Handling
- Store unopened bags in a cool, dry, sealed condition
- Use within 12 months of the manufacturing date printed on the bag
- Avoid rubbing or disturbing thin outer coatings on cured joints, which can cause powdering
- Do not add extra water to extend pot life once mixed
Why Buy From ARM Build Mart
- Authorised Weber distributor for Tamil Nadu
- Batch-fresh stock with visible manufacturing dates
- Technical support for dosage, coverage and site queries
- GST invoicing for homeowners, contractors and dealers
- Bulk and project pricing available on request
- 5-branch network with statewide dispatch across Tamil Nadu

