Weberfix Drywall Two-Component High Performance Tile & Stone Adhesive (20kg Set)
Weberfix Drywall is a two-component, high-performance tile and stone adhesive for fixing large-format tiles and moisture-sensitive stone (including green marble) onto drywall, plywood and touch-dry concrete, up to 50 feet high without support brackets. 20kg set (15kg Part A + 5kg Part B). Supplied by ARM Build Mart, authorised Weber dealer, Tamil Nadu.
Brand
Category
More Info
Product Overview
Weberfix Drywall (also referred to as Weber Drywall) is a two-component, high-performance tile and stone adhesive, supplied as a 20kg set: 15kg white Component A and 5kg pale-yellow Component B. ARM Build Mart is an authorised Weber dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.
It is purpose-built for fixing large-format tiles and stones — including moisture-sensitive marble and agglomerates — onto drywall, plywood and touch-dry concrete substrates, at heights up to 50 feet without support brackets. Being a moisture-free, two-component reaction system, it avoids the water exposure that can damage wood substrates or stain sensitive stone.
Features & Benefits
- Moisture-free reaction system — safe for wood substrates and water-sensitive stone like green marble
- Very high bond strength (tensile adhesion up to 2.14 N/mm², exceeding the 1.0 N/mm² requirement)
- Fast setting with easy application; unaffected by ambient temperature and humidity swings
- No under-tile stone treatment (back-coating) required
- Suitable for heights up to 50 feet without mechanical support brackets
- Exceeds ISO 13007 / EN 12004 classifications C2TFS2P2 and D2TA
Applications & Usage
Large-Format Tiles & Stone
Fixing large-format tiles and natural stone slabs on drywall and plywood partitions.
High Elevation Cladding
Vertical cladding up to 50 feet high without needing mechanical support brackets.
Moisture-Sensitive Stone
Green marble and other agglomerates prone to staining from water-based adhesives.
Touch-Dry Concrete
Suitable for fixing onto concrete surfaces that are touch-dry rather than fully cured.
Not suitable for: fixing metal or glass tiles — use Weber Bond Poxy for those instead. Wear gloves during application; prolonged contact may cause eye and skin irritation.
Dosage, Mixing & Consumption
Mix ratio is 3 parts Component A to 1 part Component B by weight (approximately 9:4 by volume) — the 20kg set is pre-batched to this ratio (15kg A + 5kg B). No water addition is permitted. Coverage is approximately 1.62 kg/m² per mm of bed thickness, applied at 2–10mm thickness.
- Ensure the substrate (drywall, plywood or touch-dry concrete) is clean, sound and free of dust or loose material.
- Mix the full pre-batched Component A and Component B together thoroughly until a uniform consistency is achieved. Do not add water.
- Apply with the straight edge of a notched trowel first, then comb with the notched edge; cover a maximum of 1m² per application before placing tiles.
- For heavier stones, apply adhesive to both the substrate and the back of the tile/stone (double buttering) for maximum contact.
- Place and bed the tile/stone within the pot life and open time of 15 minutes; adjust position within the same 15-minute window.
- Leave for a minimum of 10 hours before grouting; light foot traffic is possible after 60–120 minutes, with full readiness 2 days after grouting.
Full Specifications
| Product Type | Two-component, reaction-based, high-performance tile and stone adhesive |
| Component A | White paste — 15kg |
| Component B | Pale yellow paste — 5kg |
| Mix Ratio (A:B by weight) | 3:1 |
| Mix Ratio (A:B by volume) | ~9:4 |
| Packaging | 20kg set (15kg A + 5kg B) |
| Pot Life | 15 minutes |
| Open Time | 15 minutes |
| Adjustability Time | 15 minutes |
| Ready for Grouting | 10 hours |
| Light Foot Traffic | 60–120 minutes |
| Full Readiness | 2 days after grouting |
| Application Thickness | 2–10mm |
| Coverage | ~1.62 kg/m² per mm of bed thickness |
| Tensile Adhesion Strength | ≥ 1.0 N/mm² required; 2.14 N/mm² actual performance |
| Tensile Adhesion After Water Immersion | 1.89 N/mm² |
| Tensile Adhesion After Heat Ageing | 1.84 N/mm² |
| Shear Adhesion | 1.78 N/mm² |
| Standards | ISO 13007 / EN 12004; exceeds C2TFS2P2 and D2TA classifications |
| Shelf Life | 9 months from date of manufacture, in cool, dry storage |
Storage & Handling
- Store in cool, dry conditions in original sealed containers
- Use within 9 months of the manufacturing date
- Wear gloves during application — prolonged skin contact may cause irritation
Why Buy From ARM Build Mart
- Authorised Weber distributor with batch-fresh stock
- Technical support for mixing and large-format tile fixing queries
- GST invoicing for project and dealer orders
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
Can I use Weberfix Drywall on plywood?
Yes — it’s a moisture-free two-component system specifically designed to be safe on wood substrates like plywood, as well as drywall and touch-dry concrete.
How long do I have to place and adjust the tile?
The pot life, open time and adjustability window are all 15 minutes — work in sections no larger than 1m² at a time to stay within this window.
Can I use this for glass or metal tiles?
No — Weberfix Drywall is not suitable for metal or glass tiles. Ask us about Weber Bond Poxy for those applications.
Do you supply Weberfix Drywall outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?
Yes — we dispatch this and other Weber products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.

