Weber Shine Armor Gold Epoxy Glitter Grout (5kg)
Weber Shine Armor Gold (also referred to as Weber Epoxy Gold Grout) is a two-component, 100% solids, glitter-based reaction-resin epoxy grout with pre-mixed glitter for a consistent, acid-resistant, stain-resistant finish on tile and stone joints. 5kg pack. Supplied by ARM Build Mart, authorised Weber dealer, Tamil Nadu.
Brand
Category
More Info
Product Overview
Weber Shine Armor Gold (also known by the shorthand “Weber Epoxy 5Kg Gold”) is a two-component, 100% solid, glitter-based reaction-resin epoxy grout for tile and stone joints, supplied in a 5kg pack. The gold glitter is pre-mixed into the resin at the factory so no separate glitter-mixing step is needed on site. ARM Build Mart is an authorised Weber dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.
It is used on walls and floors to fill tile and stone joints with a decorative, sparkling gold finish while delivering the stain resistance, chemical resistance and low water absorption expected of a premium epoxy grout.
Features & Benefits
- Glitter pre-mixed into the resin — no separate mixing step for the glitter component on site
- Enhanced glittering effect through reflective fillers and transparent resin
- Creamy, thixotropic consistency with high sag resistance for faster, cleaner application
- Excellent stain and chemical resistance
- Low shrinkage with crack resistance
- Water-resistant and non-absorbent; inhibits bacterial and fungal growth in joints
Applications & Usage
Feature Walls & Floors
Decorative gold-glitter joint finish for tile and stone in living areas, bathrooms and commercial spaces.
Wet Areas
Water-resistant, non-absorbent joints that resist bacterial and fungal growth.
Stain-Prone Areas
Chemical and stain resistant finish suited to kitchens and high-traffic joints.
Not suitable for: industrial areas with exposure to aggressive chemicals, or surfaces subjected to pressure washing or steam cleaning. Wait a minimum of 7 days after application before acid cleaning or submerging the grouted surface in water.
Dosage, Mixing & Consumption
Mix ratio is Part A : Part B = 11.5:1 by weight (8:1 by volume). Suitable joint width range is 1mm minimum up to 7mm (vertical joints) or 14mm (horizontal joints).
- Ensure tiles are fixed, joints are clean, dry and free of adhesive residue or dust.
- Mix the full pre-batched Part A and Part B together thoroughly to the correct 11.5:1 (weight) ratio until a uniform, streak-free colour and consistency is achieved.
- Apply into the joints using a rubber grout float, working the material firmly into the joint and packing it fully.
- Remove excess material from the tile surface with a damp sponge before the grout begins to set — epoxy grout sets faster than cementitious grout, so work in manageable sections.
- Polish the tile surface with a clean, dry cloth once the surface haze appears, and again after final cure to remove any residual film.
- Allow a minimum of 7 days cure before acid cleaning the grouted surface or exposing it to submerged/wet conditions.
Full Specifications
| Product Type | Two-component, 100% solids, glitter-based reaction-resin epoxy grout |
| Mix Ratio (A:B by weight) | 11.5 : 1 |
| Mix Ratio (A:B by volume) | 8 : 1 |
| Joint Width Range | 1mm minimum; up to 7mm (vertical), up to 14mm (horizontal) |
| Packaging | 5kg pack (1kg pack also available) |
| Colour (This Listing) | Gold |
| Other Colours Available | Brown, Silver, and additional shades in the full Weber colour palette |
| Chemical/Stain Resistance | Excellent (acid-resistant formulation) |
| Post-Application Cure Before Acid Cleaning / Submersion | Minimum 7 days |
| Pot Life | [NOT STATED ON PUBLIC PRODUCT PAGE — confirm with Weber technical team before publishing] |
| Coverage/Consumption | [NOT STATED ON PUBLIC PRODUCT PAGE — depends on tile size and joint width; confirm with Weber technical team or use their online coverage calculator before publishing] |
| Full Cure Time | [NOT STATED ON PUBLIC PRODUCT PAGE — confirm with Weber technical team before publishing] |
Storage & Handling
- Store both components in their original, sealed containers in dry, cool conditions
- Mix only the full pre-batched set to maintain the correct 11.5:1 ratio
- Do not use on surfaces that will be exposed to pressure washing or steam cleaning
Why Buy From ARM Build Mart
- Authorised Weber distributor with batch-fresh stock
- Technical support for mixing and joint-width queries
- GST invoicing for project and dealer orders
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
Do I need to mix in the glitter separately?
No — the gold glitter is pre-mixed into the resin at the factory. You only need to mix Part A and Part B together in the correct 11.5:1 ratio by weight.
What joint widths can I use this for?
1mm minimum, up to 7mm for vertical joints and up to 14mm for horizontal joints.
How long before I can clean the grouted surface with acid cleaner?
Wait a minimum of 7 days after application before acid cleaning or exposing the surface to submerged/wet conditions.
Do you supply Weber Shine Armor outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?
Yes — we dispatch this and other Weber products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.

