Brand:

Weber.joint Poxy Three-Component Epoxy Tile & Stone Grout Kit (1.365kg Resin Kit)

₹2,850.00

Weber.joint Poxy (also referred to as Weber Epoxy Grout) is a 100% solids, three-component reaction-resin epoxy grout — resin, hardener and colored filler — for tile and stone joints with high mechanical strength and stain/chemical resistance. This is the mid-size 1.365kg-resin kit (2.73kg total mixed weight). Supplied by ARM Build Mart, authorised Weber dealer, Tamil Nadu.

More Info

Product Overview

Weber.joint Poxy (also referred to as Weber Epoxy Grout) is a 100% solids, reaction-resin epoxy grout system combining resin, hardener and coloured filler for tile and stone joints. This listing is the mid-size kit — 1.365kg resin, 910g hardener and 455g filler (2.73kg total mixed weight); a smaller 273g resin kit (546g total) and a larger 5.46kg resin kit (10.92kg total) are also available. ARM Build Mart is an authorised Weber dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.

It delivers high mechanical strength, impact and abrasion resistance, and is used for ceramic, vitrified, porcelain and large-format tile joints as well as natural and artificial stone, in settings ranging from homes and hospitals to industrial and food-processing facilities.

Features & Benefits

  • Easy to use with superior workability and water-cleanability during application
  • Very low shrinkage (0.18 mm/m), exceeding international standards
  • Non-sagging — suitable for both vertical and horizontal joints
  • Hygienic in service; does not support bacterial growth
  • Low VOC formulation
  • High resistance to abrasion, stains and chemicals (exceeds ANSI 118.3)
  • Passes US FDA 21 CFR 175.300 for food-contact-adjacent hygiene areas

Applications & Usage

Wet Areas & Swimming Pools

Very low water absorption (<0.1g) suited to bathrooms, showers, spas and pools (72-hour protection needed post-application).

Hygiene-Sensitive Areas

Hospitals, operation theatres, kitchens and food-processing facilities where bacterial growth resistance matters.

Industrial Facilities

Chemical plants, laboratories, dairies and breweries needing high chemical and stain resistance.

High-Traffic Zones

Subway stations, malls and airport terminals where abrasion resistance and compressive strength (62 MPa) matter.

Not suitable for: joints outside the 2–14mm width range, service temperatures outside 0°C to 80°C, or application in the presence of water or moisture (this breaks down the epoxy). No water may be added to the mix. External use may cause colour variation over time in lighter shades due to UV exposure.

Dosage, Mixing & Consumption

Mix ratio by weight is Resin : Hardener : Filler = 2 : 1 : 8 (by volume, 2 : 1 : 6) — each pack is pre-batched to this ratio. Coverage varies with joint width (2–10mm) and tile size, typically in the range of 2–10 kg/m².

  1. Ensure joints are clean, dry and free of adhesive residue, dust or moisture — any water present during grouting will break down the epoxy.
  2. Mix the resin and hardener together for 1 minute until uniform.
  3. Add 80% of the filler and mix for 2 minutes, then add the remaining 20% of filler and mix for a further 2 minutes to a smooth, creamy consistency. Use a slow-speed (100 rpm) mechanical mixer for larger batches.
  4. Apply using a rubber grout float, forcing the material into the joints continuously within the 45-minute pot life (at 27°C).
  5. Wipe excess from the tile surface immediately with a damp sponge using circular motions.
  6. Complete final cleaning and touch-ups within 30 minutes (horizontal surfaces) or 20 minutes (vertical surfaces) of application. Protect the area for 48 hours; allow a full 7-day cure (72 hours minimum before pool water contact).

Full Specifications

Product Type 100% solids, three-component reaction-resin epoxy grout (resin + hardener + filler)
Component A (Resin) Colourless resin — 1.365kg (this kit)
Component B (Hardener) Straw-coloured hardener — 910g (this kit)
Component C (Filler) Coloured filler — 455g (this kit)
Mix Ratio (Resin:Hardener:Filler, by weight) 2 : 1 : 8
Mix Ratio (by volume) 2 : 1 : 6
Packaging (This Listing) 1.365kg resin kit (2.73kg total mixed weight)
Other Pack Sizes Available 273g resin kit (546g total); 5.46kg resin kit (10.92kg total)
Wet Density 1.72 g/cc
Pot Life Up to 45 minutes at +27°C
Initial Setting 80+ minutes
Full Cure 7 days (72 hours minimum before pool water contact)
Joint Width Range 2–14mm
Service Temperature 0°C to 80°C
Compressive Strength 62 MPa (exceeds >45 MPa requirement)
Flexural Strength 32 MPa (exceeds >30 MPa requirement)
Tensile Strength 9.2 MPa
Thermal Shock Resistance 4.6 MPa
Shrinkage 0.18 mm/m
Abrasion Resistance 210 mm³
Water Absorption < 0.1g (tested at 0.07g)
Standards ISO 13007 Part 4 (Classification RG); ANSI 118.3; US FDA 21 CFR 175.300
Shelf Life 2 years from date of packing

Storage & Handling

  • Store all three components in original, sealed containers, away from moisture
  • Use within 2 years of the packing date
  • Clean grouted surfaces only with neutral pH soap water; acid cleaning is permissible only after 7–14 days

Why Buy From ARM Build Mart

  • Authorised Weber distributor with batch-fresh stock
  • Technical support for mixing and joint-width queries
  • GST invoicing for project and dealer orders
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

How much does this kit cover?

Coverage depends on joint width and tile size, roughly 2–10 kg/m². Use Weber’s coverage calculator or ask our technical team for your specific tile size and joint width.

Can I use this for a swimming pool?

Yes — it has very low water absorption, but the grouted area needs at least 72 hours’ protection before pool water contact, and full cure takes 7 days.

Do I need to add water when mixing?

No — never add water. Moisture during grouting breaks down the epoxy. Mix only the supplied resin, hardener and filler.

Do you supply Weber.joint Poxy outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?

Yes — we dispatch this and other Weber products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.