Brand:

SikaTop Seal-109 Elastomeric Crack-Bridging Waterproofing Coating (50kg Set)

Original price was: ₹9,305.00.Current price is: ₹7,690.00.

SikaTop Seal-109 (also known as Sikatop 109) is a two-part, elastomeric, crack-bridging acrylic polymer modified cementitious waterproofing coating with 180% elongation and 2mm static crack-bridging ability — 50kg set (20kg Part A + 30kg Part B). Supplied by ARM Build Mart, authorised Sika dealer, Tamil Nadu.

More Info

Product Overview

SikaTop Seal-109 (also referred to as Sikatop 109) is a two-part, elastomeric, liquid-applied, crack-bridging, high performance acrylic polymer modified cementitious waterproofing coating, supplied as a pre-batched 50kg set: 20kg white liquid Part A and 30kg grey powder Part B. ARM Build Mart is an authorised Sika dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.

It is used for drinking water tanks, wastewater systems, terraces, basements, swimming pools, lift pits and other wet areas, and for damp-proofing and protecting concrete against de-icing salts. Compared with SikaTop Seal-107, SikaTop Seal-109 is the elastomeric, higher-elongation option (~180% elongation, bridging static cracks up to 2mm) — better suited where some substrate movement or hairline cracking is expected.

Features & Benefits

  • Elastomeric with excellent elongation (~180%) and static crack bridging up to 2mm
  • Simple application by brush, spray or trowel; pre-batched components for consistency
  • Highly water resistant — reduces saltpetre action and prevents carbonation
  • Bonds well to all damp substrates
  • Fast curing; non-corrosive to steel and iron
  • Certified safe for contact with drinking water (CFTRI, Mysore; USFDA Method 175.300)
  • Weathering resistant — no chalking or cracking after 500 hours (IS 101)

Applications & Usage

Drinking Water Tanks

CFTRI and USFDA-certified safe for both single and repeated contact with drinking water.

Lift Pits & Basements

Crack-bridging elastomeric coating suited to below-grade structures prone to hairline movement cracks.

Terraces & Wet Areas

Weathering-resistant coating for exposed roof and terrace waterproofing.

Swimming Pools

High water resistance and flexibility for structures under sustained hydrostatic pressure.

Not suitable for: application in direct sun or strong wind, addition of extra water during mixing, or exposure to rain/frost immediately after application. Substrate must achieve a minimum pull-off strength of 1.5 N/mm² before application.

Dosage, Mixing & Consumption

Mix ratio is Part A : Part B = 1 : 1.5 by weight (the 50kg set is pre-batched to this ratio — 20kg Part A to 30kg Part B; a smaller 12.5kg set of 5kg + 7.5kg is also available). Coverage is approximately 2.0–2.2 kg/m² for two coats, varying with substrate and surface conditions.

  1. Ensure the substrate is clean, free of laitance, oils and curing compounds, and achieves a minimum pull-off strength of 1.5 N/mm². Pre-wet the substrate and keep it damp during application.
  2. Pour the full quantity of Part A liquid into a clean mixing container.
  3. While stirring slowly, gradually add the full quantity of Part B powder and mix thoroughly for at least 3 minutes until free of lumps and smooth. Do not add water under any circumstances.
  4. Apply the first coat by hard-bristled brush, spray or trowel within the pot life of ~40 minutes (at 27°C).
  5. Allow 4–6 hours (at 30°C, 50% RH) before applying the second coat, brushed crosswise to the first. Apply a third coat in areas of severe water penetration.
  6. Cure for a minimum of 5–7 days using wet hessian cloth or spray curing to ensure full cement hydration and minimise cracking. Wait 5–7 days before applying plaster or screed over the coating.

Full Specifications

Product Type Two-component, elastomeric, crack-bridging acrylic polymer modified cementitious coating
Component A Acrylic polymer liquid, white — 20kg (50kg set)
Component B Portland cement with selected aggregates and additives, grey powder — 30kg (50kg set)
Mix Ratio (A:B) 1:1.5 by weight
Packaging 50kg set (20kg A + 30kg B); also available as 12.5kg set (5kg A + 7.5kg B)
Appearance (Mixed) Grey slurry
Shelf Life 12 months from date of production, in original unopened packaging
Storage Conditions +10°C to +35°C, dry conditions; protect the liquid component from frost
Pot Life ~40 minutes (100g mass at +27°C)
Fresh Density (Mixed) ~1.65 kg/L (EN ISO 2811-1)
Tensile Strength (ASTM D412) > 1.5 N/mm²
Elongation at Break (ASTM D412) ~180%
Bond/Adhesion Strength (ASTM D7234-2019) ~1.2 N/mm² on dry concrete
Crack Bridging (EN 1062-7) ≥ 2mm, static cracks
Water Penetration (BS EN 12390-8) ~0mm at 5 bar for 72 hours
Water Vapour Transmission (ASTM E-96) < 1 g/m²-hr
Weathering Resistance (IS 101) No chalking or cracking after 500 hours
Coverage ~2.0–2.2 kg/m² for two coats
Recoat Interval 4–6 hours between coats at +30°C, 50% RH
Curing Period Minimum 5–7 days; wait 5–7 days before plastering/screeding over
Certifications CFTRI (Mysore) certified safe for drinking water contact; tested per USFDA Method 175.300 for single and repeated use

Storage & Handling

  • Store in original, unopened packaging in dry conditions between +10°C and +35°C
  • Protect the liquid Part A component from frost
  • Use within 12 months of the production date
  • Mix only the full pre-batched set to maintain the correct 1:1.5 ratio

Why Buy From ARM Build Mart

  • Authorised Sika distributor with batch-fresh stock
  • Technical support for mixing, coats and curing queries
  • GST invoicing for project and dealer orders
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

What’s the difference between SikaTop Seal-107 and Seal-109?

Seal-109 is the elastomeric version — ~180% elongation and can bridge static cracks up to 2mm, versus Seal-107 which bridges hairline cracks only. Choose Seal-109 where some substrate movement is expected.

How long between the first and second coat?

4 to 6 hours at 30°C and 50% relative humidity. Apply the second coat crosswise to the first for full coverage.

Is it safe for a drinking water tank?

Yes — it’s certified by CFTRI, Mysore and tested per USFDA Method 175.300 for both single and repeated contact with drinking water.

Do you supply SikaTop Seal-109 outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?

Yes — we dispatch this and other Sika products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.