SikaTop Seal-107 Two-Component Waterproofing Coating (25kg Set)
SikaTop Seal-107 (also known as Sikatop 107) is a two-part acrylic polymer modified cementitious waterproofing coating for water tanks, terraces, basements and swimming pools — 25kg set (5kg Part A liquid + 20kg Part B powder). Supplied by ARM Build Mart, authorised Sika dealer, Tamil Nadu.
Brand
Category
More Info
Product Overview
SikaTop Seal-107 (also referred to as Sikatop 107) is a two-part, acrylic polymer modified, cementitious liquid-applied waterproofing coating, supplied as a pre-batched 25kg set: a 5kg white liquid Part A and a 20kg grey powder Part B. ARM Build Mart is an authorised Sika dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.
It is used for interior and exterior waterproofing of potable water tanks and reservoirs, wastewater facilities, terraces, balconies, roofs, basement walls, swimming pools and other wet areas — and also protects concrete against chloride penetration, carbonation and de-icing-salt/freeze-thaw damage.
Features & Benefits
- Easy to apply by brush, spray or flat trowel — no additional water required in the mix
- Pre-batched components for consistent quality every time
- Highly water resistant — reduces saltpetre and prevents carbonation
- Protects concrete from chloride penetration
- Non-corrosive to steel reinforcement; approved for contact with potable water
- Flexible enough to bridge hairline (static) cracks
- Bonds well to all damp substrates
- Fast curing with good abrasion resistance
Applications & Usage
Water Tanks & Reservoirs
Certified for use in contact with potable water and aqueous foods (per USFDA 175.300 via CFTRI certification).
Terraces, Balconies & Roofs
Exterior waterproofing coating resistant to weathering, with good abrasion resistance for trafficked areas.
Basement Walls
Bonds well to damp substrates, suited to below-grade waterproofing applications.
Swimming Pools & Wet Areas
Withstands sustained water exposure once fully cured (no ponding before 7 days).
Not suitable for: application in direct sunlight or strong wind, in freezing conditions, or on cracks subject to ongoing structural movement (SikaTop Seal-107 bridges static hairline cracks only, not dynamic/moving cracks).
Dosage, Mixing & Consumption
Mix ratio is Part A : Part B = 1 : 4 by weight (the full 25kg set is pre-batched to this ratio — 5kg Part A liquid to 20kg Part B powder). Coverage is approximately 1.5 kg/m² per coat.
- Pour the full quantity of Part A liquid into a clean mixing container.
- While stirring slowly (mechanically), gradually add the full bag of Part B powder.
- Mix thoroughly for at least 3 minutes until the slurry is free from lumps and has a smooth, uniform consistency. Do not add water under any circumstances.
- Apply the first coat with a hard-bristled brush, squeegee or flat trowel.
- Allow the first coat to set, then apply the second coat in a crosswise direction to the first for full, pinhole-free coverage. In areas of severe water penetration, a third coat may be required.
- Cure for a minimum of 7 days using wet hessian cloth, spray curing or an approved method; do not allow the coating to be subjected to standing water (ponding) before 7 days have passed.
Full Specifications
| Product Type | Two-component, acrylic polymer modified cementitious waterproofing coating |
| Component A | Acrylic polymer liquid, white — 5kg |
| Component B | Portland cement with selected aggregates and additives, grey powder — 20kg |
| Mix Ratio (A:B) | 1:4 by weight |
| Packaging | Pre-batched 25kg set (5kg Part A + 20kg Part B) |
| Appearance (Mixed) | Grey slurry |
| Shelf Life | 12 months from date of production, in original sealed packaging |
| Storage Conditions | +10°C to +35°C, dry conditions, original sealed packaging |
| Pot Life | ~40 minutes (100g mass at +27°C) |
| Fresh Mortar Density | ~2.0 kg/L at +27°C |
| Tensile Strength (ASTM D412) | ≥ 2.0 N/mm² |
| Tensile Adhesion Strength (ASTM D4541) | ≥ 2.0 N/mm² |
| Elongation at Break (ASTM D412) | ~10% |
| Shore A Hardness (ASTM D2240) | ~90 |
| Water Penetration (BS EN 12390-8) | ~0mm penetration at 5 bar for 72 hours |
| Coverage | ~1.5 kg/m² per coat |
| Recommended Coats | 2 coats standard; 3 coats in areas of severe water penetration |
| Curing Period | Minimum 7 days before exposure to standing water |
| Certifications | SGS Certificate (acute lethal toxicity per IS 6582); CFTRI Certificate for aqueous food/potable water contact per USFDA 175.300 |
Storage & Handling
- Store in original, sealed packaging in dry conditions between +10°C and +35°C
- Use within 12 months of the production date
- Mix only the full pre-batched set to maintain the correct 1:4 ratio — do not part-mix
Why Buy From ARM Build Mart
- Authorised Sika distributor with batch-fresh stock
- Technical support for mixing, coats and curing queries
- GST invoicing for project and dealer orders
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
How many coats of SikaTop Seal-107 do I need?
Two coats is standard practice, applied crosswise to each other. In areas with severe water penetration, a third coat may be needed.
Do I need to add water when mixing?
No — Part A liquid and Part B powder are pre-batched to the correct 1:4 ratio. Do not add any water; mix only the two supplied components.
Is it safe for drinking water tanks?
Yes — it carries a CFTRI certificate for contact with aqueous foods and potable water per USFDA 175.300, and an SGS toxicity certificate per IS 6582.
Do you supply SikaTop Seal-107 outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?
Yes — we dispatch this and other Sika products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.

