SikaRep MicroConcrete-4 (30kg)
SikaRep MicroConcrete-4 is a factory-designed, pourable, shrinkage-compensated microconcrete for deep structural repairs to columns, beams, bridges, and dams — reaching 65 N/mm² compressive strength at 28 days. Supplied by ARM Build Mart, authorised Sika dealer, Tamil Nadu.
Brand
Category
More Info
Product Overview
SikaRep MicroConcrete-4 (also referred to as Sika Microcrete Rep-4) is a factory-designed, pourable, shrinkage-compensated, high-performance microconcrete supplied as a ready-to-mix powder in 30kg bags. ARM Build Mart is an authorised Sika dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch to all 38 districts.
It is used for deep structural repairs to concrete elements including bridges, culverts, wharfs, tunnels, dams, car parks, basements, power stations and sewerage facilities, and for column/beam jacketing and structural strengthening through section enlargement. The product only needs on-site addition of water (and coarse aggregate for thicker pours) and is designed to be pumped or poured without vibration.
Features & Benefits
- No vibration required — excellent flow characteristics, easily pumpable
- Rapid strength development with high ultimate strengths (up to 65 N/mm² at 28 days)
- Dense, non-shrink concrete with dual-stage expansion (up to 4%) after initial set
- Strong bonding to existing/parent concrete
- Iron and chloride free — non-corrosive, non-toxic
- Impact resistant
- Adjustable consistency/flow through controlled water dosage
Applications & Usage
Bridge & Culvert Repair
Deep section repairs where high early and ultimate strength are needed under traffic-load conditions.
Column & Beam Jacketing
Structural strengthening by section enlargement using formwork and pumped/poured microconcrete.
Dams, Wharfs & Marine Structures
Chloride-free, non-corrosive formulation suited to structures exposed to water and marine conditions.
Basements & Power Stations
Pumpable, self-flowing microconcrete for confined or congested reinforcement zones.
Not suitable for: pours exceeding 100mm thickness without added aggregate, or use beyond the stated pot life — re-tempering with extra water is not permitted as it reduces strength and can cause shrinkage.
Dosage, Mixing & Consumption
Water:powder ratio 0.14–0.16 by weight, i.e. approximately 4.2–4.8 litres of water per 30kg bag depending on the flow consistency required. Approximate consumption is 1900 kg of powder per m³ of finished concrete — for a 30kg bag this works out to roughly 63 bags per m³ (exact bag count depends on aggregate addition and layer thickness).
- Ensure the concrete substrate is clean, sound, free from oil/grease/loose particles, and well pre-saturated with water (no standing surface water) before pouring.
- Pre-measure 80–90% of the mixing water into the mixer.
- Gradually add the full 30kg bag while mixing continuously — do not use partial bags.
- Add the remaining water (and coarse aggregate, if being used for thicker pours) and mix for a minimum of 3 minutes until a uniform, flowing consistency is achieved.
- Pour or pump within the pot life (~20 minutes at +30°C) — maintain continuous flow to avoid trapped air and cold joints.
- Keep formwork in place for a minimum of 3 days; on removal, cure exposed surfaces immediately with Sika Antisol curing compound or an approved equivalent method.
Full Specifications
| Product Type | Factory-designed, pourable, shrinkage-compensated microconcrete |
| Appearance | Grey powder |
| Packaging | 30kg bag |
| Shelf Life | 6 months from date of production, in original unopened, undamaged packaging |
| Storage Conditions | +5°C to +35°C, dry conditions, protected from moisture, direct sunlight and frost |
| Mixing Ratio (Water:Powder) | 0.14–0.16 by weight (4.2–4.8 L water per 30kg bag) |
| Fresh Mortar Density | 2.15 ± 0.15 kg/L (EN ISO 2811-1) |
| Pot Life | ~20 minutes at water:powder 0.15, +30°C |
| Compressive Strength (ASTM C109) | 1 day: ≥25 N/mm²; 3 days: ≥35 N/mm²; 7 days: ≥45 N/mm²; 28 days: ≥65 N/mm² |
| Flexural Strength (ASTM C293) | 7 days: ≥8 N/mm²; 28 days: ≥9 N/mm² |
| Splitting Tensile Strength (ASTM C496) | ≥3.5 N/mm² at 28 days |
| Expansion (ASTM C1090) | Up to 4% (dual-stage, after initial set) |
| Shrinkage | No shrinkage after initial setting |
| Layer Thickness | Min 25mm; max 100mm per pour without added aggregate |
| Application Temperature Range | +5°C to +40°C (ambient and substrate) |
| Consumption | ~1900 kg powder per m³ of finished concrete |
| Formwork Removal / Curing | Minimum 3 days before formwork removal; cure exposed faces immediately after |
| Maximum Aggregate Size (with added aggregate) | [NOT STATED ON TDS — confirm with Sika technical team before publishing] |
| Chloride Content | Chloride free (iron and chloride free formulation, per TDS) |
| Standards / Test Certification | Shriram Institute for Industrial Research Test Certificate C1/0000227197 (2020); IIT Bombay Test Report (2015); IIT Delhi Consultancy Report (2014) |
Storage & Handling
- Store in original, unopened, undamaged packaging in dry conditions between +5°C and +35°C
- Protect bags from moisture, direct sunlight and frost
- Use within 6 months of the production date
- Use full bags only for consistent results — do not use partial bags
Why Buy From ARM Build Mart
- Authorised Sika distributor with batch-fresh stock
- Technical support for dosage, mixing and application queries
- GST invoicing for project and dealer orders
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
How much water do I add per 30kg bag of SikaRep MicroConcrete-4?
4.2 to 4.8 litres, giving a water:powder ratio of 0.14–0.16 by weight, depending on the flow consistency you need.
Can I pour more than 100mm thickness in one go?
Not without adding coarse aggregate to the mix. Above 100mm per pour, aggregate must be added — check with our technical team for the correct aggregate ratio for your repair depth.
How long do I have to place the mix once mixed?
Around 20 minutes at 30°C (pot life). Don’t mix more than you can pour in that window, and never add extra water once mixing is done.
Do you supply SikaRep MicroConcrete-4 outside Pudukkottai/Trichy/Sivagangai/Thanjavur/Karaikudi?
Yes — we dispatch this and other Sika products to all 38 districts of Tamil Nadu for bulk and project orders. Share your delivery location and quantity for a quote.

