JK WallmaxX White Cement Wall Putty (40kg)
JK WallmaxX is a white cement-based wall putty formulated with imported Xtra Long Life Polymers (XLLP) for a brilliantly white, smooth finish on plastered walls and ceilings before painting. Covers approximately 35 sq.ft/mm/kg. Available at ARM Build Mart, authorised JK White dealer.
Brand
Category
More Info
Product Overview
JK WallmaxX is a white cement-based fine powder wall putty formulated with imported Xtra Long Life Polymers (XLLP). ARM Build Mart is an authorised JK White dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.
It gives a smooth, brilliantly white finishing coat on concrete or cement plastered walls and ceilings before painting, and can be applied over AAC blocks, hollow blocks, precast walls and concrete surfaces.
Features & Benefits
- Formulated with imported Xtra Long Life Polymers (XLLP) for durability
- Brilliant whiteness for a bright base coat under paint
- Works on concrete, AAC blocks, hollow blocks and precast walls
- Smooth, even finish that improves final paint coverage and appearance
Applications & Usage
Interior Walls & Ceilings
Smooth finishing coat on plastered interior surfaces before painting.
AAC & Hollow Block Walls
Suitable finishing putty for AAC block, hollow block and precast wall surfaces.
Concrete Surfaces
Fine, workable finish over cement-plastered concrete walls.
Paint Preparation
Provides an even, white base that enhances the final painted finish.
Not suitable for: previously painted surfaces or non-cementitious substrates.
Dosage, Mixing & Consumption
Mix with 35-40% clean water by weight (approximately 33-38% by volume). Coverage is approximately 35 sq.ft per mm thickness per kg — actual coverage depends on the base surface condition and finished thickness.
- Prepare a smooth, lump-free paste by mixing JK WallmaxX powder with water at the recommended ratio.
- Apply uniformly with a putty blade from bottom to top, at 4-10mm thickness per coat, up to a maximum of 2 coats.
- Allow 4-6 hours drying between coats (about 4 hours in hot weather, up to 12 hours in cold weather), then wait 2-3 days before painting.
| Product Type | White cement-based wall putty with imported XLLP (Xtra Long Life Polymers) |
| Colour | White |
| Pack Size | 40kg |
| Mixing Ratio | 35-40% water by weight |
| Coverage | ~35 sq.ft/mm thickness/kg |
| Number of Coats | Maximum 2 (4-10mm thickness per coat) |
| Drying Time Between Coats | 4-6 hours (4 hrs hot season, up to 12 hrs cold season) |
| Drying Time Before Painting | 2-3 days |
| Standards Compliance | [NOT STATED ON TDS — confirm with JK White technical team before publishing] |
| Shelf Life | [NOT STATED ON TDS — confirm with JK White technical team before publishing] |
| Storage Conditions | [NOT STATED ON TDS — confirm with JK White technical team before publishing] |
| HSN Code | [FROM YOUR ERP] |
Storage & Handling
- Store in a dry place, away from moisture.
- Open the bag only just before use.
Why Buy From ARM Build Mart
- Authorised JK White dealer — genuine, batch-fresh stock
- Technical support for dosage and application queries
- GST invoicing on every order
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
How much area does a 40kg bag of JK WallmaxX cover?
Roughly 35 sq.ft per mm of thickness per kg — tell us your wall area and coat thickness and we can help estimate quantity.
How many coats should I apply?
A maximum of two coats, each 4-10mm thick, with 4-6 hours drying time between them.
Can I use this on AAC block walls?
Yes — JK WallmaxX is suitable for AAC blocks, hollow blocks, precast walls and standard concrete surfaces.
Is this available outside your branch districts?
Yes — we dispatch JK WallmaxX and other JK White products across all districts of Tamil Nadu, including bulk and project orders.

