Brand:

JK ActivV White Cement Wall Putty (40kg)

₹830.00

JK ActivV is a white cement-based wall putty with Active Polymer Technology for a smooth, damp-resistant finish on interior and exterior plastered walls and ceilings before painting. Covers approximately 280 sq.ft per 20kg (proportionally ~560 sq.ft/40kg) at standard thickness. Available at ARM Build Mart, authorised JK White dealer.

More Info

Product Overview

JK ActivV is a white cement-based wall putty formulated with Active Polymer Technology, supplied as a fine white powder. ARM Build Mart is an authorised JK White dealer with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.

It provides an ideal, smooth, damp-resistant finishing base for paint on cement-plastered walls and ceilings, concrete, rendered walls, hollow blocks, precast walls, calcium silicate bricks and aerated lightweight blocks. Not recommended for previously painted or non-cementitious surfaces.

Features & Benefits

  • Active Polymer Technology for strong adhesion and a rich, smooth finish
  • Minimum 93% whiteness for a bright base coat under paint
  • Good resistance to dampness/humidity
  • Suitable for both interior and exterior surfaces
  • Easy to apply with a spatula in up to two coats

Applications & Usage

Interior Walls & Ceilings

Smooth finishing coat on plastered interior walls and ceilings before painting.

Exterior Walls

Damp-resistant finish suited to exterior plastered and rendered surfaces.

Concrete & Block Surfaces

Works on concrete, hollow blocks, precast walls, calcium silicate bricks and aerated lightweight blocks.

Paint Preparation

Provides a fine, even base that improves final paint finish and coverage.

Not suitable for: previously painted surfaces or non-cementitious substrates.

Dosage, Mixing & Consumption

Mix with approximately 35-40% water by volume to a smooth, workable paste. Coverage is approximately 280 sq.ft per 20kg bag (roughly 560 sq.ft for this 40kg bag) at standard recommended thickness, or approximately 35 sq.ft per mm thickness per kg.

  1. Prepare a smooth, lump-free paste by adding JK ActivV powder to water (35-40% water by volume) and mixing thoroughly.
  2. Apply the first coat with a spatula from bottom to top, up to 1.5mm thick.
  3. After 4-12 hours, apply a second coat horizontally, up to 1.0mm thick, then allow at least 3 days to dry fully before painting.
Product Type White cement-based wall putty with Active Polymer Technology
Colour White (minimum 93% whiteness)
Pack Size 40kg laminated bag
Mixing Ratio 35-40% water by volume
Coverage ~280 sq.ft per 20kg bag (~35 sq.ft/mm thickness/kg)
Number of Coats Up to 2 (1.5mm first coat, 1.0mm second coat)
Setting Time 6-12 hours between coats
Drying Time Before Painting 3 days
Compressive Strength 10 N/mm²
Flexural Strength 3.13 N/mm²
Pull-Off (Bond) Strength 0.63 N/mm²
Wet Density 1670 kg/m³
Standards Compliance ASTM C191, C948, C348, C349, D4541, C1794; USEPA 24 [figures from JK’s standard white cement wall putty datasheet — confirm ActivV-specific values with JK technical team before publishing]
Storage Conditions Store in a dry place; open the bag just before use
Shelf Life [NOT STATED ON TDS — confirm with JK White technical team before publishing]
HSN Code [FROM YOUR ERP]

Storage & Handling

  • Store in a dry place, away from moisture.
  • Open the bag only just before use to prevent premature moisture absorption.

Why Buy From ARM Build Mart

  • Authorised JK White dealer — genuine, batch-fresh stock
  • Technical support for dosage and application queries
  • GST invoicing on every order
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

How much area does a 40kg bag of JK ActivV cover?

Roughly 560 sq.ft at standard thickness, based on the manufacturer’s ~280 sq.ft per 20kg coverage figure — actual coverage depends on surface and application thickness.

How many coats do I need to apply?

Up to two coats — a 1.5mm first coat, then a 1.0mm second coat 4-12 hours later, applied at right angles to the first.

Can I use this on a previously painted wall?

No — JK ActivV is designed for cementitious surfaces and isn’t recommended over existing paint or non-cementitious substrates.

Is this available outside your branch districts?

Yes — we dispatch JK ActivV and other JK White products across all districts of Tamil Nadu, including bulk and project orders.