Fosroc Renderoc RG Non-Shrink Repair Microconcrete (25kg)
Fosroc Renderoc RG is a general purpose, non-shrink cementitious repair microconcrete for reinforced concrete repair, restricted access pours, encasement and jacketing. Pumpable/pourable, up to 50 N/mm2 at 28 days. Available at ARM Build Mart, authorised Fosroc distributor.
Brand
Category
More Info
Product Overview
Fosroc Renderoc RG is a general purpose, non-shrink, cementitious microconcrete supplied as a ready-to-use dry powder blend requiring only the site addition of clean water. ARM Build Mart is an authorised Fosroc distributor with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.
It repairs damaged reinforced concrete and is suited to restricted access areas and structural strengthening work such as encasement and jacketing, thanks to its highly fluid, self-placing consistency.
Features & Benefits
- Gaseous expansion system compensates for shrinkage — a true non-shrink repair mortar
- Can be pumped or poured into restricted or congested locations
- Highly fluid — placement possible without vibration
- Rapid early strength gain with high ultimate strength
- Contains no chloride admixture
- Low permeability once cured
Applications & Usage
Reinforced Concrete Repair
Repairs damaged RCC members while protecting embedded reinforcement.
Restricted Access Pours
Free-flowing consistency reaches congested or hard-to-access repair zones.
Encasement & Jacketing
Used in structural strengthening work such as column and beam jacketing.
Larger Section Repairs
Extended with 5-12mm graded aggregate on site for sections thicker than 100mm.
Not suitable for: single pours over 100mm thick without the addition of approved 5-12mm aggregate — consult Fosroc technical team for thick-section repairs.
Dosage, Mixing & Consumption
Mix at a water-to-powder ratio of approximately 0.16 by weight per 25kg bag. Yield is approximately 13.0 litres per 25kg bag (actual yield varies with consistency and any on-site aggregate addition).
- Add the measured water to a clean mixing vessel, then add the powder gradually while mixing continuously with a slow-speed drill and paddle until a lump-free, flowable consistency is achieved.
- For sections up to 100mm thick, pour or pump the mix directly without added aggregate.
- For larger sections, extend the mix on site with approved 5-12mm clean, graded, saturated surface-dry aggregate before placing.
| Product Type | General purpose, non-shrink, cementitious repair microconcrete |
| Form | Dry powder blend |
| Pack Size | 25kg moisture-resistant bag |
| Mixing Ratio | ~0.16 water:powder by weight per 25kg bag |
| Yield | ~13.0 litres per 25kg bag |
| Max Thickness (unmodified) | 100mm; larger sections extended with 5-12mm aggregate |
| Application Method | Pumped or poured, self-placing without vibration |
| Compressive Strength (1 day) | 10 N/mm² |
| Compressive Strength (7 days) | 40 N/mm² |
| Compressive Strength (28 days) | 50 N/mm² |
| Flexural Strength (28 days) | 5 N/mm² |
| Standards Compliance | BS 4551-80, ASTM C827-1987 |
| Shelf Life | 6 months in dry store, original unopened bags |
| Storage Conditions | Dry storage; shelf life reduced at high temperature/humidity |
| Colour | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| HSN Code | [FROM YOUR ERP] |
Storage & Handling
- Store in a dry area in original, unopened, moisture-resistant bags.
- Shelf life 6 months from manufacture under proper storage; reduced at high temperature/humidity.
Why Buy From ARM Build Mart
- Authorised Fosroc distributor — genuine, batch-fresh stock
- Technical support for dosage and application queries
- GST invoicing on every order
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
How much water do I mix with a 25kg bag of Renderoc RG?
Approximately 0.16 parts water to 1 part powder by weight, giving a yield of about 13 litres per bag.
Can I pour Renderoc RG into a restricted access area?
Yes — it’s designed to be highly fluid and self-placing, so it can be pumped or poured into congested or hard-to-reach repair zones without vibration.
What if my repair section is thicker than 100mm?
Extend the mix on site with approved 5-12mm clean, graded, saturated surface-dry aggregate before placing.
Is this available outside your branch districts?
Yes — we dispatch Fosroc Renderoc RG and other Fosroc products across all districts of Tamil Nadu, including bulk and project orders.

