Brand:

Fosroc Nitobond EP Epoxy Bonding Agent (1L)

Original price was: ₹2,550.00.Current price is: ₹1,357.00.

Fosroc Nitobond EP is a two-part, solvent-free epoxy resin bonding agent for bonding new cementitious mortars/screeds to existing concrete and steel-to-concrete applications. 40 N/mm2 compressive strength, 120-minute pot life at 35C. Available at ARM Build Mart, authorised Fosroc distributor.

More Info

Product Overview

Fosroc Nitobond EP is a 100% solids, solvent-free epoxy resin bonding agent containing pigments and fine filler, supplied as a two-part, pre-weighed system. ARM Build Mart is an authorised Fosroc distributor with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.

It bonds new cementitious mortars and screeds to existing cementitious surfaces, and bonds steel to concrete in reinforcement and structural repair work — used on factory floors, loading bays, trucking aisles, bridges, roads and bonded/granolithic floor toppings, including areas with permanent water immersion.

Features & Benefits

  • 100% solids, solvent-free two-part epoxy system
  • Pre-weighed components — white base and green hardener give visual confirmation of adequate mixing
  • High compressive strength: 40 N/mm² (BS 6319 Pt 2)
  • High bond strength: 11 N/mm² (ASTM C881)
  • Long pot life — at least 120 minutes at 35°C, with overlay time up to 3 hours
  • Performs well even under permanent water immersion

Applications & Usage

Concrete Overlays

Bonds new screed or mortar toppings securely to existing concrete substrates.

Steel-to-Concrete Bonding

Used in reinforcement and structural repair projects needing a strong steel-concrete bond.

Industrial Floors

Suited to factory floors, loading bays and trucking aisles subject to heavy use.

Bridges & Roads

Used in bridge deck and road repair/extension work requiring a durable bonding layer.

Not suitable for: [NOT STATED ON TDS — confirm incompatible substrates/situations with Fosroc technical team before publishing]

Dosage, Mixing & Consumption

Coverage: approximately 2.0-2.5 m² per 1 litre pack (approximately 8.0-10.0 m² for the 4L pack).

  1. Mix the pre-weighed base and hardener components fully until a uniform colour is achieved (no streaks of white or green) — this confirms adequate mixing.
  2. Apply the mixed Nitobond EP to the prepared substrate using a brush.
  3. Place the new mortar, screed or concrete onto the bonding coat within the working/overlay time (up to 3 hours) while it is still tacky.
Product Type Two-part, 100% solids, solvent-free epoxy resin bonding agent
Form Liquid, two-part (base + hardener)
Pack Size 1 Litre (also available 0.5L, 4L)
Coverage 2.0-2.5 m² per 1L pack
Pot Life At least 120 minutes at 35°C
Overlay Time Up to 3 hours
Application Method Brush
Compressive Strength 40 N/mm² (BS 6319 Pt 2)
Tensile Strength 15 N/mm² (BS 6319 Pt 7)
Flexural Strength 25 N/mm² (BS 6319 Pt 3)
Bond Strength 11 N/mm² (ASTM C881)
Standards Compliance BS 6319 Parts 2, 3, 7; ASTM C881
Shelf Life Up to 12 months in unopened containers
Storage Conditions Cool, dry place, below 35°C
Colour White base / green hardener (mixed colour uniform)
HSN Code [FROM YOUR ERP]

Storage & Handling

  • Store unopened in a cool, dry place below 35°C.
  • Shelf life up to 12 months in unopened original containers.

Why Buy From ARM Build Mart

  • Authorised Fosroc distributor — genuine, batch-fresh stock
  • Technical support for dosage and application queries
  • GST invoicing on every order
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

How much area does a 1L pack of Nitobond EP cover?

Approximately 2.0-2.5 m² per litre, applied by brush as a bonding coat.

How do I know the two parts are mixed properly?

Mix until the colour is uniform — the white base and green hardener are designed so any streaking means it’s not fully mixed yet.

How long do I have to place new concrete after applying Nitobond EP?

Pot life is at least 120 minutes at 35°C, with an overlay time of up to 3 hours — place the new material while the bonding coat is still tacky.

Is this available outside your branch districts?

Yes — we dispatch Fosroc Nitobond EP and other Fosroc products across all districts of Tamil Nadu, including bulk and project orders.