Brand:

Fosroc Conbextra GP2 Precision Grout (25kg)

Original price was: ₹1,550.00.Current price is: ₹570.00.

Fosroc Conbextra GP2 is a free-flow, high strength, non-shrink cementitious precision grout for machine bases, anchor bolts and static/dynamic load grouting. Achieves 65-68 N/mm2 at 28 days. Available at ARM Build Mart, authorised Fosroc distributor.

More Info

Product Overview

Fosroc Conbextra GP2 is a free flow, high strength, non-shrink, cementitious precision grout supplied as a ready-to-use dry powder. ARM Build Mart is an authorised Fosroc distributor with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.

It is used for precision grouting under static and dynamic loads such as turbines, compressors and boiler feed pumps, and for anchoring masts, anchor bolts and fence posts, achieving high early and long-term compressive strength.

Features & Benefits

  • Free-flowing at the specified water ratio — fills gaps up to 100mm thick
  • Non-shrink, precision grout formulation
  • High early strength: 24-26 N/mm² at 1 day
  • High long-term strength: 65-68 N/mm² at 28 days
  • Can be hand placed, poured or pumped (diaphragm, screw feed or piston pump)
  • Complies with BS 1881 Part 116:1983, BS 4551:1998, IS 516-1959 and ASTM D469-94

Applications & Usage

Machine Base Grouting

Precision grouting under turbines, compressors and boiler feed pumps subject to static and dynamic loads.

Anchor Bolts

High-strength, non-shrink fill around anchor bolts for secure, load-bearing anchoring.

Mast & Post Anchoring

Anchoring masts and fence posts where a free-flowing, high-strength grout is needed.

Pumped Grouting

Flowable mix design suits pumped placement in congested or hard-to-reach areas.

Not suitable for: pours thicker than 100mm without aggregate addition — consult Fosroc technical team for thick-section grouting.

Dosage, Mixing & Consumption

Mix each 25kg bag with 4.125 litres of water for a pourable consistency (yield 12.5 litres) or 4.5 litres of water for a flowable consistency (yield 13.3 litres).

  1. Add the measured water to a clean mixing vessel, then add the powder gradually while mixing continuously with a slow-speed drill and paddle until lump-free.
  2. Place the mixed grout within 20 minutes of mixing (at 30°C) to gain the full expansion benefit — expansion occurs between 20 and 120 minutes after mixing.
  3. Pour, hand place or pump into position; single pours up to 100mm thick are possible without aggregate addition.
Product Type Free flow, high strength, non-shrink cementitious precision grout
Form Dry powder
Pack Size 25kg moisture-resistant bag
Mixing Ratio (Pourable) 4.125 L water per 25kg bag, yield 12.5 L
Mixing Ratio (Flowable) 4.5 L water per 25kg bag, yield 13.3 L
Max Gap Thickness Up to 100mm (single pour)
Compressive Strength (1 day) 24-26 N/mm²
Compressive Strength (7 days) 55-57 N/mm²
Compressive Strength (28 days) 65-68 N/mm²
Pot Life Place within 20 minutes of mixing at 30°C
Expansion Window 20-120 minutes after mixing
Application Method Hand placement, pouring, or pumping (diaphragm/screw feed/piston pump)
Standards Compliance BS 1881 Part 116:1983, BS 4551:1998, IS 516-1959, ASTM D469-94
Shelf Life 6 months in dry, sealed storage (reduced in high heat/humidity)
Storage Conditions Store dry, in sealed bags
Colour [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
HSN Code [FROM YOUR ERP]

Storage & Handling

  • Store in a dry area in original sealed, moisture-resistant bags.
  • Shelf life is 6 months from date of manufacture under proper storage; shelf life is reduced at high temperature and/or humidity.

Why Buy From ARM Build Mart

  • Authorised Fosroc distributor — genuine, batch-fresh stock
  • Technical support for dosage and application queries
  • GST invoicing on every order
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

How much water do I mix with a 25kg bag of Conbextra GP2?

4.125 litres for a pourable mix, or 4.5 litres for a more flowable mix, depending on your placement method.

How long do I have to place the grout after mixing?

Place within 20 minutes of mixing at 30°C to get the full expansion benefit — expansion happens between 20 and 120 minutes after mixing.

What compressive strength can I expect?

24-26 N/mm² at 1 day, rising to 65-68 N/mm² at 28 days — suitable for machine bases under dynamic load.

Can I get this delivered outside your branch districts?

Yes — we dispatch Fosroc Conbextra GP2 and other Fosroc products across all districts of Tamil Nadu, including bulk and project orders.