Brand:

Fosroc Brushbond Roofguard White Waterproof Coating (20L)

Original price was: ₹4,500.00.Current price is: ₹2,413.00.

Fosroc Brushbond Roofguard is a high-build, fibre reinforced acrylic elastomeric waterproofing render for roofs, applied in 3+ colour-differentiated coats for over 1mm dry film thickness. UV and weather durable, crack-accommodating. Available at ARM Build Mart, authorised Fosroc distributor.

More Info

Product Overview

Fosroc Brushbond Roofguard is a high build, fibre reinforced acrylic elastomeric waterproofing render designed for roofing. ARM Build Mart is an authorised Fosroc distributor with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.

It is applied directly onto existing concrete, brickbat coba or screed concrete roofs in three or more coats, each a different colour so the applicator can visually confirm full, even coverage and build a total dry film thickness exceeding 1mm.

Features & Benefits

  • High build system giving over 1mm dry film thickness in three coats
  • Applies directly on existing sound substrates — no removal needed
  • No protection screed required after application
  • Excellent barrier to carbon dioxide, chloride and sulphate ion ingress
  • Water vapour permeable, letting trapped moisture escape
  • Long-term weathering and UV resistance for all climatic conditions
  • Superior bond to concrete and masonry
  • Good crack accommodation capacity
  • Minimal surface preparation needed
  • Suitable for light pedestrian traffic once cured

Applications & Usage

Old & New Roofs

Waterproofs both new roof slabs and ageing roofs without removing the existing surface.

Brickbat Coba Roofs

Bonds well to brickbat coba and screed concrete finishes common on Indian terraces.

Exterior Exposed Surfaces

Seamless, UV-stable coating for surfaces exposed to sun and rain year-round.

Light Foot Traffic Areas

Cured coating tolerates light pedestrian movement on terraces.

Not suitable for: [NOT STATED ON TDS — confirm incompatible substrates/situations with Fosroc technical team before publishing]

Dosage, Mixing & Consumption

Approximate coverage: ~250 sq.ft (~23 m²) per 20L pack across the full 3-coat system (source: authorised Fosroc reseller listing; manufacturer TDS coverage figure not independently retrieved this session — confirm exact per-coat rate before publishing).

  1. Prepare the substrate — Brushbond Roofguard needs only minimal surface preparation on sound concrete, brickbat coba or screed.
  2. Apply the first coat and allow it to dry/cure per the manufacturer’s recoat interval.
  3. Apply two or more further coats, each a different colour, until full opaque coverage and the target dry film thickness (>1mm) is achieved.
Product Type High build, fibre reinforced acrylic elastomeric waterproofing render
Form Liquid/paste coating
Colour White (this SKU); each of the 3 application coats is a different colour for build verification
Pack Size 20L
Coverage ~250 sq.ft (~23 m²) per 20L pack, full system [reseller-sourced figure — confirm exact manufacturer coverage before publishing]
Number of Coats 3 or more
Dry Film Thickness >1mm (3-coat system)
Mixing Ratio [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
Application Method Brush, roller or trowel (typical for this product range)
Pot Life [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
Recoat / Curing Time [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
Standards Compliance [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
Shelf Life [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
Storage Conditions [NOT STATED ON TDS — confirm with Fosroc technical team before publishing]
HSN Code [FROM YOUR ERP]

Storage & Handling

  • Store in original sealed packaging in a dry, covered area away from direct sunlight.
  • [NOT STATED ON TDS — confirm exact shelf-life and storage temperature range with Fosroc technical team before publishing]

Why Buy From ARM Build Mart

  • Authorised Fosroc distributor — genuine, batch-fresh stock
  • Technical support for dosage and application queries
  • GST invoicing on every order
  • Bulk and project pricing available
  • 5-branch network across Tamil Nadu with statewide dispatch

Frequently Asked Questions

How many coats of Brushbond Roofguard do I need?

Three or more coats, each a different colour so you can see full coverage as you apply — together giving over 1mm dry film thickness.

Do I need to remove the old roof coating first?

Usually no — Brushbond Roofguard is designed to apply directly onto sound existing concrete, brickbat coba or screed with minimal prep.

Can I walk on the roof after coating?

Yes, once fully cured it’s designed for light pedestrian traffic. Avoid heavy or constant foot traffic.

Is this available outside your branch districts?

Yes — we dispatch Fosroc Brushbond Roofguard and other Fosroc products across all districts of Tamil Nadu, including bulk and project orders.