Fosroc Brushbond RFX Grey Waterproof Coating (20kg)
Fosroc Brushbond RFX is a two-component acrylic polymer modified cementitious waterproof coating for roofs, terraces, balconies, water tanks and bathrooms. Flexible, breathable and brush/roller/trowel/spray applied. Available at ARM Build Mart, authorised Fosroc distributor.
Brand
Category
More Info
Product Overview
Fosroc Brushbond RFX is a two-component, acrylic polymer modified cementitious coating supplied in pre-packaged form. ARM Build Mart is an authorised Fosroc distributor with 5 branches across Tamil Nadu (Pudukkottai, Trichy, Sivagangai, Thanjavur, Karaikudi) and statewide dispatch.
It is mixed on site using a slow speed drill fitted with a mixing paddle, then applied to the prepared substrate by brush, roller, trowel or spray. Once cured it forms a durable, flexible, seamless waterproofing barrier used across roofs, terraces, balconies, water tanks and bathrooms.
Features & Benefits
- Fully waterproof coating that still allows water vapour to escape from the structure (breathable)
- Highly resistant to long-term weathering, durable in all climatic conditions
- Non-toxic with excellent bond to concrete and masonry
- Minimum surface preparation required before application
- Flexible film that can accommodate minor substrate movement
- Designed to accept light foot traffic once cured
- Does not require overcoating
- Finished coating has a slightly granular, textured surface
Applications & Usage
Roofs & Terraces
Flexible, weather-resistant coating protects exposed roof slabs from water ingress.
Balconies
Waterproofs balcony slabs while remaining walkable under light foot traffic.
Water Tanks
Cementitious coating bonds well to concrete tank walls to prevent seepage.
Bathrooms & Wet Areas
Brush/trowel application suits confined wet-area surfaces before tiling.
Not suitable for: [NOT STATED ON TDS — confirm incompatible substrates/situations with Fosroc technical team before publishing]
Dosage, Mixing & Consumption
Approximate coverage: 14 m² per 20kg pack (source: authorised Fosroc reseller listing; manufacturer TDS coverage figure not independently retrieved this session — confirm exact per-coat, per-m² rate below before publishing).
- Mix the supplied liquid and powder components on site using a slow speed drill fitted with a mixing paddle until a lump-free, workable consistency is achieved.
- Apply the mixed coating to the prepared, sound substrate by brush, roller, trowel or spray.
- Allow the coating to cure before exposing to foot traffic or water immersion.
| Product Type | Two-component acrylic polymer modified cementitious coating |
| Form | Paste (liquid + powder components) |
| Colour | Grey |
| Pack Size | 20kg (20.088kg) |
| Coverage | ~14 m² per 20kg pack [reseller-sourced figure — confirm exact manufacturer coverage before publishing] |
| Mixing Ratio | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| Application Method | Brush, roller, trowel or spray |
| Pot Life | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| Curing / Foot Traffic Ready | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| Standards Compliance | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| Shelf Life | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| Storage Conditions | [NOT STATED ON TDS — confirm with Fosroc technical team before publishing] |
| HSN Code | [FROM YOUR ERP] |
Storage & Handling
- Store in original sealed packaging in a dry, covered area away from direct sunlight.
- [NOT STATED ON TDS — confirm exact shelf-life and storage temperature range with Fosroc technical team before publishing]
Why Buy From ARM Build Mart
- Authorised Fosroc distributor — genuine, batch-fresh stock
- Technical support for dosage and application queries
- GST invoicing on every order
- Bulk and project pricing available
- 5-branch network across Tamil Nadu with statewide dispatch
Frequently Asked Questions
How much Brushbond RFX do I need for my roof area?
Approximate coverage is 14 m² per 20kg pack. Tell us your exact roof area and we’ll confirm the quantity and number of coats needed.
How is Brushbond RFX applied?
Mix the liquid and powder components with a slow-speed drill and paddle, then apply by brush, roller, trowel or spray onto a clean, sound substrate.
Can I walk on the coated surface?
Yes, Brushbond RFX is designed to accept light foot traffic once cured. Avoid heavy traffic until fully cured.
Is Brushbond RFX available outside your branch districts?
Yes — we dispatch Fosroc Brushbond RFX and other Fosroc products across all districts of Tamil Nadu, including bulk and project orders.

